xGenius front

xGenius system

xGenius network pannel


Built-in Rubidium clock

Built-in Rubidium


One-way Delay with GPS


xGenius front


ALL-IN-ONE tester:
Ethernet/PTP/SyncE
T1/E1/E0/Datacom
C37.94/OWD

xGenius

xGenius is a nice handheld tester equipped with a large (8 in) capacities touch-screen to make easier the analysis and results interpretation. It is 100% suitable for labs or field use because is full equipped with IP / Ethernet / PTP / SyncE / T1 / E1 / E0 / C37.94 and Datacom interfaces, battery operated, light (1.9kg) and very rugged. The unit is able to test transmission and synchronization networks up to 10Gb/s. It supports master/slave PTP emulation. Multiple operation modes are possible and includes Performance, Quality, One-way Delay and Wander tests at all interfaces. A built-in Rubidium clock disciplined with GNSS oscillator to provides high accuracy and continue working perfectly in holdover mode.

You may buy just a last generation dual port 10GbE tester and then you may add other interfaces just when you need it by a simple and easy upgrade by code. Then you will be able to get the new firmware supporting the desired functionalities.

Platform

Multiport Interfaces

  • A:B ports: 2 x SFP/SFP+ (100MbE, 1GbE, 10GbE, 10G WAN)
  • A:B ports: 2 x RJ45 (10MbE, 100MbE, 1GbE)
  • C:D ports: Balanced 2 x RJ45 (T1/E1)
  • C:D ports: Unbalanced 2 x BNC (T1/E1)
  • GNSS Port: SMA female
  • PPS Ports: 3xSMA female (i/o)
  • DTE-AUX / DCE Ports: 2xSS26 (i/o)
  • VF Port

  • Operation / Results

  • Graphic and tabular wander results
  • Navigation: by touch screen, keyboard, mouse
  • Remote Control: by VNC
  • Storage capacity: one week of results
  • Export: results in pdf/txt/csv through USB interface or SD card
  • Report export to remote host through Ethernet / IP
  • Ergonomics

  • Size: 260 x 160 x 63 mm
  • Weight: 1.9 kg
  • Light and easy to carry in a small bag
  • Start: Manual / Timed with optional password
  • Batteries

  • Two pack of Lipo batteries always included
  • Large duration that also depends on operation, conditions, aging, etc.
  • Time / Clocks

    Internal Clocks

  • Default better than ±2.0 ppm
  • OCXO better than ±0.1 ppm
  • Rubidium better than ±5.0e-11 (GNSS disciplined, warm- up: 600s)
  • Internal Rubidium clock

    Free―run (No GPS)

  • Freq. accuracy (7.5 minutes warm up): ± e-9
  • Freq. accuracy on shipment (24 h. warm up): ±5.0e-11
  • Aging (1 day, 24 hours warm up): ±0.5e-11
  • Aging (1 year): ±1e-9
  • GPS locked

  • Time accuracy (24 h. locked): ±50 ns
  • Hold - over (after 24 h. locked)

  • Freq. accuracy: 1.5e-11 / 24h
  • Time accuracy: ±100 ns / 2h, ±1.0μs / 24 h
  • Input Clock References

  • Rates: 1.544 Mb/s, 2.048 Mb/s, 1.544 MHz, 2.048 MHz, 10 MHz
  • Built-in GNSS receiver, 1 pps
  • SyncE
  • GNSS
  • ToD
  • 1PPS
  • T1/E1 (1544 kb/s, 2048 kb/s)
  • Custom delay compensation for phase and time
  • Output Clock

  • 2.048 MHz, 10 MHz
  • 1 pps
  • ToD
  • Custom delay compensation for phase and time
  • SyncE and PTP testing

  • PTP profiles: Telecom and Power
  • Encapsulations: Ethernet and UDP
  • Clock emulation: Master / Slave, Unicast/Multicast, 128 packet/s
  • PDV capture, protocol analysis and correction field support
  • Ethernet PTP Frequency testing

  • Floor Delay Population (G.8260): FPC, FPR, FPP
  • Wander: Analysis and Generation TIE, MTIE and TDEV (in real time)
  • Ethernet PTP Phase testing

  • Measured at GbE and 1pps interfaces
  • Time Error (TE): Maximum (max |TE|), Dynamic (dTE), Constant (cTE)
  • 1 pps testing

  • Wander: TIE, MTIE, TDEV
  • Time Error (TE): Maximum (max |TE|)
  • Synchronous Ethernet

  • ESMC / SSM: Generation, decoding and transparent forwarding
  • Wander: Analysis/Generation: TIE, MTIE and TDEV (in real time)

  • Latency/Delay measurements

    E1, T1, GbE and 10GbE interfaces

  • Round-trip delay (RTD)
  • One-way delay (OWD) GNSS assisted
  • Ethernet PTP (GbE and 10GbE)

  • Floor delay packet population, ratio/percentage/count
  • Path delay asymmetry
  • End-to-end / peer-to-peer path delay mechanisms
  • Master-to-slave / Slave-to-grandmaster latency
  • PTP packet delay variation test
  • Time Error (TE): Maximum (max |TE|), Dynamic (dTE), Constant (cTE)

  • Ethernet/IP Testing

    8 x independent streams

  • Streams: may use individual sour/dest. addresses and bandwidth profile
  • Internet Protocol: IPv4 / IPv6 support
  • Frames: DIX, VLAN, Q-in-Q, CoS (DSCP/PCP), MPLS, and Jumbo
  • IP with UDP or arbitrary protocol
  • DHCP for source IP and ARP for destination MAC
  • Counts et statistics

  • Frame counts, IP traffic statistics, and bit rate
  • Top ten VLAN, MAC, IPv4 and IPv6 addresses
  • QoS: Latency, Delay variation, Loss ratio, SES, Availability, OOS, Duplicated
  • BER Tests et Patterns

  • Traffic generation: Continuous, Burst, Ramp, Random
  • PHY layer: RPAT, JPAT, SPAT, HFPAT, LFPAT, MFPAT, LCRPAT, SCRPAT
  • Layer 2/4 PRBS: 2e11-1, 2e15-1, 2e20-1, 2e23-1, 2e31-1
  • Layer 2/4 PRBS: all inverted versions
  • Symmetric/Asymmetric RFC-2544

  • Throughput
  • Latency
  • Loss
  • Back-to-back
  • System Recovery
  • Symmetric/Asymmetric eSAM (Y.1564)

  • Latency, Delay Variation, Loss, and Availability
  • Eight / four services (colour/not colour)
  • CIR, EIR, max, Througput
  • Loopback

  • L1 - L4 loopback mode
  • Traffic filtering by
  • sour/dest MAC/IP/Port
  • VLAN, CoS (DSCP/PCP)
  • Protocol
  • PDH / T.Carrier testing

    Interfaces

  • T1 (ANSI T1.102)
  • E1 (ITU-T G.703)
  • E0/Co-Directional (ITU-T G.703)
  • Modes

  • Terminal
  • Monitor
  • High Impedance
  • Pass-through
  • T1: Framed SF and ESF and unframed Generation/Analysis
  • E1: Framed PCM-30 / 31 with/without CRC and Unframed signals
  • T1/E1: Display and Edition: all fields, CAS, Pulse Masks, Events
  • Channel map: Busy/Free, External Drop/Insert of 64 kb/s co-dir or datacom
  • Measurements

  • BER
  • Line/Freq
  • Errors/Alarms
  • G.821, G.826, M.2100
  • VF: tone generation/analysis
  • Attenuation, Freq, Freq. deviation, Level, Peak codes
  • Synchronization

  • Jitter analysis: Peak to peak, RMS, hits, count (0.1 to 100 kHz range)
  • Wander: Analysis/Generation and masks (1 μHz to 10 Hz range)
  • Wander Analysis/Generation in 10 MHz, 2048 kHz, 1544 kHz, 1pps
  • C37.94 testing

    Operation Modes

  • Unframed or framed operation
  • Clock: Recovered or Internal
  • End point or terminal mode
  • Results with PASS/FAIL indications

    Analysis & Generation

  • Bit Rate generation in steps of nx64 kb/s up to 768 kb/s
  • BER test
  • ITU-T G.821 performance test
  • Event Detection / Insertion
  • Defects: LOS, AIS, LOF, RDI, LSS, All 0, All 1
  • Anomalies: FAS, TSE, Slip

    Delay & Freq. Tests

  • Round Trip Delay (ms)
  • One-way Delay synchronized with GPS
  • Frequency (Hz)
  • Frequency Deviation (ppm), max. Deviation

    C37.94 SFPs

  • Multi-mode: SFP 850 nm, 2048 kbit/s, 1500 meters
  • Single-mode; SFP 1310 nm, 2048 kbit/s, 10 km
  • Optical Power Meter
  • Cable features

    Cable tests

  • Wiremap
  • Skew
  • Cable Diagnostics
  • Distance to fault

    Power over Ethernet

  • PoE and PoE+
  • Volts / Current
  • Datacom testing

    Modes

  • Terminal emulation
  • Bi-directional Monitoring
  • Datacom / E1 mux
  • Display and Edition

  • DTE/DCE control circuit
  • Timing circuits
  • Binary rates
  • Tests

  • BER, Frequency
  • Insertion/Analysis of events
  • G.821


  • Ordering Information

    CODE DESCRIPTION
    AT.xGenius.HH xGenius hand-held tester. Battery operated. 1 Gb/s Ethernet tester with optional 10 Gb/s Ethernet, E1/T1 and synchronization capabilities. Includes dual 10/100/1000 Mb/s electrical ports, dual SFP+ ports. QoS statistics, RFC2544 performance test, L1-L4 BER test, continuous / burst / ramp / random traffic generation, traffic statistics, error analysis, connectivity test ('ping', 'traceroute'), analysis filters, event insertion, endpoint and pass-through operation modes, graphical display of events, report generation and export. Includes AC/DC adapter, transportation bag, one RJ-45 patch cable, one BNC-BNC patch cable. SFP+ and SFP transceivers not included. Ether.Genius 10GbE hand-held tester. Battery operated. 10 Gb/s Ethernet tester with optional E1, data communications and synchronization capabilities. Includes dual 10/100/1000 Mb/s electrical ports, dual SFP+ ports. QoS statistics, RFC2544 performance test, L1-L4 BER test, continuous / burst / ramp / random traffic generation, traffic statistics, error analysis, connectivity test ('ping', 'traceroute'), analysis filters, event insertion, endpoint and pass-through operation modes, graphical display of events, report generation and export. Includes AC/DC adapter, transportation bag, one RJ-45 patch cable, one BNC-BNC patch cable. SFP+ and SFP transceivers not included.
    AT.xGenius.10GO 10 G/bs optical Ethernet test. Adds 10GBASE-SR, 10GBASE-LR and 10GBASE-ZR interfaces. Multistream test. Generation over eight independent traffic streams. Eight analysis filters for each test port.
    AT.xGenius.10GE 10 G/bs electrical Ethernet test. Adds 10GBASE-T interface. Multistream test. Generation over eight independent traffic streams. Eight analysis filters for each test port.
    AT.XGenius.ETHDUAL Dual port Ethernet generation and analsysis. Adds autonomous and simultaneous traffic generation capabilities to both Ethernet ports.
    AT.xGenius.MSTR Multistream test. Generation over eight independent traffic streams. Eight analysis filters for each test port. Multistream test. Generation over eight independent traffic streams. Eight analysis filters for each test port.
    AT.xGenius.1564 "eSAM (ITU-T Y.1564) Test of up to 8 services simultaneously. Set up of CIR, EIR and policing rate. Per stream quality objectives. Measurement of Information Rate (IR), Frame Transfer Delay (FTD), Frame Delay Variation (FDV), Frame Loss Ratio (FLR) and Availability. [REQUIRES: AT.xGenius.MSTR]" "eSAM (ITU-T Y.1564) Test of up to 8 services simultaneously. Set up of CIR, EIR and policing rate. Per stream quality objectives. Measurement of Information Rate (IR), Frame Transfer Delay (FTD), Frame Delay Variation (FDV), Frame Loss Ratio (FLR) and Availability. [REQUIRES: AT.M10G.MSTR]"
    AT.xGenius.6349 "TCP Throughput test (RFC 6349). Computes TCP throughput, efficiency and buffer delay over single or multiple TCP connections following the methodology defined in RFC 6349. This test requires either two compatible test units to be installed in at the ends of the transmission path to be measured or one unit plus a computer running Iperf version 3. [ASK FOR AVAILABILITY BEFORE ORDERING]"
    AT.xGenius.IPV6 IPV6 test. Decoding and analysis of IPV6 datagrams. IPV6 traffic statistics and events. IPV6 packet filtering. TOP IPV6 source and destination addresses (with Network search option). IPV6 test. Decoding and analysis of IPV6 datagrams. IPV6 traffic statistics and events. IPV6 packet filtering. TOP IPV6 source and destination addresses (with Network search option).
    AT.xGeniusS.MPLS MPLS test. Generation of single or double MPLS label according RFC 3032. Configuration of TTL, Traffic class, Label. Filter selection rules by Label and Traffic class fields. Analysis of MPLS. Top LSPs (with Network search option). MPLS test. Generation of single or double MPLS label according RFC 3032. Configuration of TTL, Traffic class, Label. Filter selection rules by Label and Traffic class fields. Analysis of MPLS. Top LSPs (with Network search option).
    AT.xGenius.WIRE Cable test. Wiremap with open and short circuit detection. Measurement of distance to fault. Crossover / straight cable detection. Measurement of cable skew. Cable test. Wiremap with open and short circuit detection. Measurement of distance to fault. Crossover / straight cable detection. Measurement of cable skew.
    AT.xGenius.POE Power over Ethernet test. PoE / PoE+ end point and pass through as per IEEE 802.3af and IEEE 802.3at with voltage and current measurement. Power over Ethernet test. PoE / PoE+ end point and pass through as per IEEE 802.3af and IEEE 802.3at with voltage and current measurement.
    AT.xGenius.NS Network Search. Automatic detection of up to 16 most frequent streams listed by Ipv4, VLAN and MAC. Network Search. Automatic detection of up to 16 most frequent streams listed by Ipv4, VLAN and MAC.
    AT.xGenius.ASYM "Asymmetric RFC 2544 and eSAM (ITU-T Y.1564). Enables separated measurement of upstream and downstream performance for RFC 2544 (measurement of throughput, latency, frame loss, back-to-back frames and system recovery) and eSAM (measurement of the IR, FTD, FDV, FLR and Availability). Enables responder operation in asymmetric RFC 2544 and eSAM tests. [REQUIRES AT.xGenius.GNSS or AT.xGenius.GPS]"
    Ethernet testing accessories
    AT.1000SX.SFP SFP Adapter 1.25 Gbps SFP, 850 nm, MMF, 500 m reach, w/ DDM, Duplex LC, 0/70C SFP Adapter 1.25 Gbps SFP, 850 nm, MMF, 500 m reach, w/ DDM, Duplex LC, 0 / 70C
    AT.1000LX.SFP SFP Adapter 1.25 Gbps SFP, 1310 nm, MMF, 20 km reach, w/ DDM, Duplex LC, 0 / 70C SFP Adapter 1.25 Gbps SFP, 1310 nm, MMF, 20 km reach, w/ DDM, Duplex LC, 0 / 70C
    AT.1000ZX.SFP SFP Adapter 1.25 Gbps SFP, 1550 nm, MMF, 80 km reach, w/ DDM, Duplex LC, 0 / 70C SFP Adapter 1.25 Gbps SFP, 1550 nm, MMF, 80 km reach, w/ DDM, Duplex LC, 0 / 70C
    AT.10GT.SFP SFP Adapter 10GBASE-T Electrical SFP transceiver, SGMII, 0 / 70C SFP Adapter 10GBASE-T Electrical SFP transceiver, SGMII, 0 / 70C
    AT.100FX.SFP SFP Adapter 100BASE-FX, 125 Mb/s SFP, 1310 nm, MMF, 2 km reach, w/ DDM, SGMII, Duplex LC, 0 / 70C SFP Adapter 100BASE-FX, 125 Mb/s SFP, 1310 nm, MMF, 2 km reach, w/ DDM, SGMII, Duplex LC, 0 / 70C
    AT.10GS.SFP SFP Adapter 10 Gb/s, 850 nm, MMF, 300 m reach, w/ DDM, Duplex LC, 0 / 70C SFP Adapter 10 Gb/s, 850 nm, MMF, 300 m reach, w/ DDM, Duplex LC, 0 / 70C
    AT.10GL.SFP SFP Adapter 10 Gb/s, 1310 nm, SMF, 2 km reach, w/ DDM, Duplex LC, 0 / 70C SFP Adapter 10 Gb/s, 1310 nm, SMF, 2 km reach, w/ DDM, Duplex LC, 0 / 70C
    AT.10GZ.SFP SFP Adapter 10 Gb/s, 1550 nm, SMF, 40 km reach, w/ DDM, Duplex LC, 0 / 70C SFP Adapter 10 Gb/s, 1550 nm, SMF, 40 km reach, w/ DDM, Duplex LC, 0 / 70C
    AT.10GPDA.SFP SFP 10Gb/s cable assembly. 10 Gb/s SFP+ passive direct attach cable assembly, 1m SFP 10Gb/s cable assembly. 10 Gb/s SFP+ passive direct attach cable assembly, 1m
    AT.10GWDM.SFP SFP Adapter 10Gb/s, 1550 nm, SMF, 80 km reach, w/DDM, DWDM, Full C-band tunable, Duplex LC, 0-70C SFP Adapter 10Gb/s, 1550 nm, SMF, 80 km reach, w/DDM, DWDM, Full C-band tunable, Duplex LC, 0-70C
    TDM and Datacom testing
    AT.xGenius.E1 E1 test. ITU-T G.703 2048 kb/s testing including BNC and RJ48 connectors, E1 generation and analysis; ITU-T G.704 frame structure with or without CRC and with or without CAS; internal, recovered and external clock references; CAS ABCD bits generation and analysis; FAS / NFAS analysis; E1 frame occupation map; add / drop of E1 time slots to analog and low rate digital interface; frequency and received power level measurements; G.821, G.826 and M.2100 performance analysis; round trip delay measurement; VF analysis. E1 test. ITU-T G.703 2048 kb/s testing including BNC and RJ48 connectors, E1 generation and analysis; internal, recovered and external clock references; G.821, G.826 and M.2100 performance analysis; frequency and received power level measurements; CAS ABCD bits generation and analysis; delay measurement.
    AT.xGenius.T1 T1 test. ANSI T1.102 1544 kb/s dual port testing including RJ-48 and Bantam connectors. T1 generation and analysis; ANSI T1.403 SF (D4) and ESF frame structures with robbed bit generation and analysis; FDL signaling channel; internal, recovered and external clock references; T1 frame occupation map; frequency and received power level measurements; G.821, G.826 and M.2100 performance analysis; round trip delay measurement. E1 test. ITU-T G.703 2048 kb/s testing including BNC and RJ48 connectors, E1 generation and analysis; internal, recovered and external clock references; G.821, G.826 and M.2100 performance analysis; frequency and received power level measurements; CAS ABCD bits generation and analysis; delay measurement.
    AT.xGenius.DATA Datacom test. DTE / DCE emulation and datacom monitor modes. V24 / V.28 (RS-232) asynchronous and synchronous interfaces, X.21 / V.11 (RS-422), V.35, V.36 (RS-449), EIA-530 and EIA-530A. Datacom cables not included.
    AT.xGenius.PULSE "Pulse Mask Analysis. Displays the pulse shape and checks compliance with ITU-T G.703 or ANSI T1.102 masks. Includes eye diagram operation mode and analysis of pulse time and level metrics. [REQUIRES: AT.xGenius.E1 or AT.xGenius.T1]" "Pulse Mask Analysis. Displays the pulse shape and checks compliance with ITU-T G.703 mask. Includes eye diagram operation mode and analysis of pulse time and level metrics. [REQUIRES AT.M10G.E1]"
    AT.xGenius.OWD "One-way delay test. Measures end-to-end, one-way delay in ITU-T G.703 2048 kb/s, ANSI T1.102 1544 kb/s, IEEE C37.94, Datacom and VF interfaces. This test requires two compatible test units to be installed in at the ends of the transmission path to be measured. [REQUIRES: AT.xGenius.E1 or AT.xGenius.T1 or AT.xGenius.VFD] [REQUIRES AT.xGenius.GNSS]"
    AT.xGenius.VFD "V.23 Modem. Enables latency tests in VF interfaces. AUX port adapter not included. [REQUIRES: AT.xGenius.DATA]"
    AT.xGenius.TDMDUAL "Dual port E1 / T1 generation and analsysis. Adds simultaneous traffic generation capabilities over two ITU-T G.703 2048 kb/s or ANSI T1.102 1544 kb/s ports. AUX port adapter not included. [REQUIRES: AT.xGenius.E1 or AT.xGenius.T1]"
    TDM and Datacom testing accessories
    AT.76 Mini Balun. RJ48 to BNC male, one way. Input adapter
    AT.77 RJ48 to bantam adapter. RJ48 male to bantam male.
    AT.80 AUX VF adapter. Input / output 3.5mm audio jack to DIN41628 (4 mm Siemens type) connector G.711 VF test, PCM, level and frequency. VF adapter. IUT-T G.711 test for measurement of PCM level and frequency.
    AT.801 AUX VF adapter. Input / output 3.5mm audio jack to RJ45connector G.711 VF test, PCM, level and frequency. VF adapter. IUT-T G.711 test for measurement of PCM level and frequency.
    AT.86 Stereo audio adapter. Stereo audio input adapter. Stereo audio adapter. Stereo audio input adapter.
    AT.88 AUX Codirectional adapter. Input / output, Smart Serial to DIN41628 (4 mm Siemens type) connector, G.703 E0 interface Codirectional adapter. Input / output, smart serual to DIN1628 (4 mm Siemens type) connector, ITU-T G703 E0 interface.
    AT.89 AUX IEEE C37.94 adapter. Input / output, Smart Serial to SFP, IEEE C37.94 interface. IEEE C37.94 adapter. Input / output, Smart Serial to SFP, IEEE C37.94 interface.
    AT.90 RJ48 to RJ48 E1 crossover cable. RJ48 to RJ48 E1 crossover cable.
    AT.92 AUX Dual E1 / T1 port Adapter. Smart Serial to RJ45. Balanced E1 / T1 in / out
    AT.97 AUX VF latency adapter. Modulates the datacom interface to enable testing over a VF channel.
    AT.HS Head-set 3.5 mm jack integrated headphone and microphone. Head-set 2.5 mm jack integrated headphone and microphone.
    AT.V24 V.24 / V.28 / RS-232 cables. V24 / V.28 / RS-232 DTE and DCE interface cables. V.24 / V.28 / RS-232 cables. V24 / V.28 / RS-232 DTE and DCE interface cables.
    AT.X21 X.21/V.11 cables. X.21/V.11 DTE and DCE interface cables. X.21/V.11 cables. X.21/V.11 DTE and DCE interface cables.
    AT.V35 V.35 cables. V.35 DTE and DCE interface cables. V.35 cables. V.35 DTE and DCE interface cables.
    AT.V36 V.36/RS-449 cables. V.36/RS-449 DTE and DCE interface cables. V.36/RS-449 cables. V.36/RS-449 DTE and DCE interface cables.
    AT.530 EIA-530 / EIA-530A cables. EIA-530 / EIA-530A DTE and DCE interface cables. EIA-530 / EIA-530A cables. EIA-530 / EIA-530A DTE and DCE interface cables.
    AT.C37.94SX.SFP IEEE C37.94 SFP adapter.2048 kb/s SFP, 850 nm, 2Km, MMF, Duplex LC, 0 / 70C. IEEE C37.94 SFP adapter.2048 kb/s SFP, 850 nm, MMF, Duplex LC, 0 / 70C.
    AT.C37.94Lx.SFP IEEE C37.94 SFP Adapter 2048 Kbps SFP, 1310 nm, 20Km, SMF, Duplex LC, 0 - 70C IEEE C37.94 SFP adapter.2048 kb/s SFP, 850 nm, MMF, Duplex LC, 0 / 70C.
    AT.C37.94LX2.SFP IEEE C37.94 SFP adapter 2048 kb/s SFP, 1310 nm, 60Km, SMF, Duplex LC, 0 / 70C IEEE C37.94 SFP adapter.2048 kb/s SFP, 850 nm, MMF, Duplex LC, 0 / 70C.
    AT.C37.94Zx.SFP IEEE C37.94 SFP Adapter 2048 Kb/s SFP, 1550 nm, 120Km, SMF, Duplex LC, 0 / 70C IEEE C37.94 SFP adapter.2048 kb/s SFP, 850 nm, MMF, Duplex LC, 0 / 70C.
    Synchronization testing
    AT.xGenius.SE SyncE Clock Emulation. Synchronization testing according to ITU-T G.8261, G.8262, G.8264. Ethernet line frequency (MHz), offset (ppm), drift (ppm/s). Analysis / Generation of ESMC messages. External reference clock input 2048 kbit/s, 2048 kHz, 1544 kbit/s, 1544 kHz, 10 MHz, Synchronous Ethernet , 1 PPS and ToD. External reference clock output 2048 kHz, 10 Mhz, 1 PPS and ToD. 1 PPS / ToD input / output adapter not included. SyncE Clock Emulation. Synchronization testing according to ITU-T G.8261, G.8262, G.8264. Ethernet line frequency (MHz), offset (ppm), drift (ppm/s). Analysis / Generation of ESMC messages. External reference clock input 2048 kbit/s, 2048 kHz, 1544 kbit/s, 1544 kHz, 10 MHz, Synchronous Ethernet and 1 PPS. External reference clock output 2048 kHz and 1 PPS. 1 PPS input / output adapter not included.
    AT.xGenius.SEW "SyncE wander test. Synchronous Ethernet TIE / MTIE / TDEV measurement. Synchronous Ethernet wander generation. [REQUIRES: AT.xGenius.SE] [REQUIRES: AT.xGenius.OCXO or AT.xGenius.RB]" "SyncE Wander test. Synchronous Ethernet TIE / MTIE / TDEV measurement. Synchronous Ethernet wander generation. [REQUIRES: AT.EGenius.SE]"
    AT.xGenius.PTP IEEE 1588v2 / PTP Clock Emulation. PTP master and slave emulation. PTP passive monitoring. PTP message classification and analysis. PDV analysis. External reference clock input 2048 kbit/s, 2048 kHz, 1544 kbit/s, 1544 kHz, 10 MHz, Synchronous Ethernet , 1 PPS and ToD. External reference clock output 2048 kHz, 10 Mhz, 1 PPS and ToD. 1 PPS / ToD input / output adapter not included.
    AT.xGenius.PTPW "IEEE 1588v2 / PTP wander test. PTP time interval error (TIE), maximum TIE (MTIE) and time deviation TDEV measurement. Floor delay population test. Time error (TE), maximum Time Error and path asymmetry test. [REQUIRES: AT.xGenius.PTP] [REQUIRES: AT.xGenius.OXCO or AT.xGenius.RB]"
    AT.xGenius.JW "E1 / T1 Jitter / Wander. Peak-to-peak jitter, RMS jitter, max. jitter, jitter hits detection. Configuration of jitter filters. Frequency offset (ppm), frequency drift (ppm/s). Wander metrics (TIE, MTIE, TDEV). Sinusoidal jitter and wander generation. [REQUIRES: AT.xGenius.E1 or AT.xGenius.T1]" "E1 Jitter / Wander. Peak-to-peak jitter, RMS jitter, max. jitter, jitter hits detection. Configuration of jitter filters. Frequency offset (ppm), frequency drift (ppm/s). Wander metrics (TIE, MTIE, TDEV). Sinusoidal jitter and wander generation. [REQUIRES AT.EGenius.E1]"
    AT.xGenius.CLK "1544 kHz, 2048 kHz, 10 Mhz, 1 PPS and ToD clock monitoring. Clock TE / TIE / MTIE / TDEV analysis, frequency (Hz), frequency offset (ppm) and frequency drift (ppm/s) analysis, jitter / wander analysis. External reference clock input 2048 kbit/s, 2048 kHz, 1544 kbit/s, 1544 kHz, 10 MHz, Synchronous Ethernet , 1 PPS and ToD. External reference clock output 2048 kHz, 10 Mhz, 1 PPS and ToD. AUX input / output adapters not included. [REQUIRES: AT.xGenius.OCXO or AT.xGenius.RB]" "E1 Jitter / Wander. Peak-to-peak jitter, RMS jitter, max. jitter, jitter hits detection. Configuration of jitter filters. Frequency offset (ppm), frequency drift (ppm/s). Wander metrics (TIE, MTIE, TDEV). Sinusoidal jitter and wander generation. [REQUIRES AT.EGenius.E1]"
    AT.xGenius.OCXO OCXO time reference. High performance internal oscillator replacing the standard time reference installed in the application board. OCXO time reference. High performance internal oscillator replacing the standard time reference installed in the application board.
    AT.xGenius.RB Rubidium time reference. Atomic (Rubidium) internal oscillator replacing standard time reference installed in the application board.
    AT.xGenius.GNSS Built in GPS / GLONASS / Beidou / Galileo RF interface (SMA connector). Provides absolute time reference required by one-way latency measurements and TDM, Synchronous Ethernet and IEEE 1588v2 synchronization tests. Includes compact GNSS antenna with magnet (5m cable /SMA M) and 10 meters 50 Ohm coaxial cable with SMA male / female connectors.
    Synchronization testing accessories
    AT.91 "AUX Sync adapter. Smart Serial to RJ45. External reference clock input 1 PPS. External reference clock output 1 PPS. Additional external reference clock input 2048 kbit/s, 2048 kHz, 1544 kbit/s, 1544 kHz, 10 MHz. Additional external reference clock output 2048 kHz. Includes AT.40 for PPS In and AT.41 for PPS out. "
    AT.96 AUX 1 PPS / ToD Sync adapter. External balanced reference cock input 1 PPS / ToD. External balanced reference clock output 1 PPS / ToD. Compatible with ITU-T G,8271 and V.11
    AT.Coax.10M 10 meters 50 Ohm coaxial cable with SMA male / female connectors. Extends the range of the GPS /GLONASS antenna by 10 meters.
    General options and accessories
    AT.VNC.RC Graphical Remote Control. Based on VNC for Windows and Linux. Ethernet / IP remote control that duplicates the tester graphical user interface in a remote computer. Graphical Remote Control. Based on VNC for Windows and Linux. Ethernet / IP remote control that duplicates the tester graphical user interface in a remote computer.
    AT.SNMP.RC SNMP Remote Control and automation. Based on SNMP protocol allows user to control the tester remotelly using SNMP queries.
    AT.WIFI.RC "Wi.Fi USB Remote Control wireless interface to be used together with VNC. [REQUIRES: AT.VNC.RC]" "Wi.Fi USB Remote Control wireless interface to be used together with VNC. [REQUIRES: AT.VNC.RC]"
    AT.27 Car cord power adapter, including 2.5mm DC connector "Wi.Fi USB Remote Control wireless interface to be used together with VNC. [REQUIRES: AT.VNC.RC]"
    Calibration services
    AT.xGenius.CERT Certificate of calibration. Accuracy calibration certificate, executed only when is sold and before its shipment. Certificate of calibration. Accuracy calibration certificate, executed only when is sold and before its shipment.
    AT.xGenius.CHECK Periodic Unit Verification. Includes board test verification (Calibration, Internal Frequency), test port verification (Ports A / B / C: Ethernet, SFP, unbalanced E1, balanced E1) and analog verification (level port A / B / C, line attenuation, jitter error, pulse mask). Periodic Unit Verification. Includes board test verification (Calibration, Internal Frequency), test port verification (Ports A / B / C: Ethernet, SFP, unbalanced E1, balanced E1, VF Port , DTE / DCE Ports) and analog verification (level port A / B / C, line attenuation, jitter error, pulse mask).
    Buy me